Discontinued products
Звоните, чтобы узнать цену
Производитель: AUDIOANALOGUE
Бесплатная доставка
+ -
מקבלים תשלום ב:


אשראי עד 12 תשלומים ללא ריבית.
יעוץ והכוונה מקצועית שירות והדרכה גם לאחר הקניה.
ליעוץ והזמנה טלפונית 03-5166919
 
משלוחים וזמני אספקה:

ניתן לאיסוף ממחסן ראשי ,הירקון 76 תל אביב- עד 3 ימי עסקים.
 
משלוח אקספרס עד הבית  לכל הארץ.
 
 

 

מוצרים מיבואן רשמי עם אחריות מלאה ומענה טלפוני, משלוחים מהירים לכל רחבי הארץ .

The Primo Settanta REV2.0 is the first step to enter into the high fidelity field. Because of size, used materials and elegance is a unique product which can be easily placed in every enviroments.

Technical description

The Cd Mechanism used is the CD-5010A specifically designed by Teac for high quality audio application. The CD-5010A has been developed on the basis of a CD ROM mechanism which decreases the rotation speed and improves the reading procedure. This has the particular advantage of cutting down the jitter output level. The Audio Analogue R&D staff has worked with Teac during the developing and testing of the Cd mechanism, especially with the mechanical and vibration tests. The Digital to analogue conversion circuit is composed by a 96 KHz/24Bit very low recovered system clock (residual jitter less than 50ps!) Burr Brown receiver and by a 24 Bit/192KHz Enhanced Multilevel Delta Sigma architecture DAC. The conversion circuit is placed on a separated board to avoid any high frequency disturbance on the audio signal. The output stage is a classic audio configuration in which Audio Analogue has put all its experience and knowledge choosing the best cut off filter frequency and the best components for the circuit. Both passive and active components have been chosen, including the operational amplifier as well. This selection was made not only on the basis of calculations, simulations, and measurements but also after careful listening tests. The manager software implemented comes from a long and careful research finalized to take advantage of the CD Mechanism at its best for a perfect audio return and for the best CD player management. The results achieved make the Primo Cd Player Rev2.0 a CD Player of the upper most quality characterized by a perfect return of the complete spectrum of musical colours and with a well defined, wide, real and believable listening stage.

Technical features

  • Channels 2
  • Colours 2
  • THD @ 1KHz 0dBFs <0,003 %
  • THD @ 1KHz -10dBFs <0,007 %
  • Dynamic Range 95 dB
  • Noise Level -120 dBV 
  • Output level Max 1,90Vrms
  • Analog Outputs 1 RCA
  • Digital Outputs 1 Coaxial
  • Dimensions(HxWxD) 75 x 210 x 365 mm
  • Weight 6.3 Kg

The Primo Settanta REV2.0 is the first step to enter into the high fidelity field. Because of size, used materials and elegance is a unique product which can be easily placed in every enviroments.

Technical description

The Cd Mechanism used is the CD-5010A specifically designed by Teac for high quality audio application. The CD-5010A has been developed on the basis of a CD ROM mechanism which decreases the rotation speed and improves the reading procedure. This has the particular advantage of cutting down the jitter output level. The Audio Analogue R&D staff has worked with Teac during the developing and testing of the Cd mechanism, especially with the mechanical and vibration tests. The Digital to analogue conversion circuit is composed by a 96 KHz/24Bit very low recovered system clock (residual jitter less than 50ps!) Burr Brown receiver and by a 24 Bit/192KHz Enhanced Multilevel Delta Sigma architecture DAC. The conversion circuit is placed on a separated board to avoid any high frequency disturbance on the audio signal. The output stage is a classic audio configuration in which Audio Analogue has put all its experience and knowledge choosing the best cut off filter frequency and the best components for the circuit. Both passive and active components have been chosen, including the operational amplifier as well. This selection was made not only on the basis of calculations, simulations, and measurements but also after careful listening tests. The manager software implemented comes from a long and careful research finalized to take advantage of the CD Mechanism at its best for a perfect audio return and for the best CD player management. The results achieved make the Primo Cd Player Rev2.0 a CD Player of the upper most quality characterized by a perfect return of the complete spectrum of musical colours and with a well defined, wide, real and believable listening stage.

Technical features

  • Channels 2
  • Colours 2
  • THD @ 1KHz 0dBFs <0,003 %
  • THD @ 1KHz -10dBFs <0,007 %
  • Dynamic Range 95 dB
  • Noise Level -120 dBV 
  • Output level Max 1,90Vrms
  • Analog Outputs 1 RCA
  • Digital Outputs 1 Coaxial
  • Dimensions(HxWxD) 75 x 210 x 365 mm
  • Weight 6.3 Kg
Ключевые слова