Custom Speaker SH65 - Hi-Fi Audio Power Cable 2 x 6.58 mm² shielded for AM-RCC loudspeakers

Cable SpeakerHi-End for connecting acoustic loudspeakers and amplifiers. Made of pure copper AM-RCC with a purity grade of 7N. Available by the metre or in hanks and pre-packed spools, it is ideal for home and professional installations.
390 ₪
Производитель: ricable
Бесплатная доставка
*
+ -
מקבלים תשלום ב:


אשראי עד 12 תשלומים ללא ריבית.
יעוץ והכוונה מקצועית שירות והדרכה גם לאחר הקניה.
ליעוץ והזמנה טלפונית 03-5166919
 
משלוחים וזמני אספקה:

ניתן לאיסוף ממחסן ראשי ,הירקון 76 תל אביב- עד 3 ימי עסקים.
 
משלוח אקספרס עד הבית  לכל הארץ.
 
 

 

מוצרים מיבואן רשמי עם אחריות מלאה ומענה טלפוני, משלוחים מהירים לכל רחבי הארץ .


SH65 Custom Speaker

Ricable Custom SH65 is a cable Speakermade for those who are looking for a High-End cable to make Excellent Speaker Cables, both for home and professional use. Derived from the Hexaphonic technology developed by Ricable, it has conductors made of AM-RCC Copper with a purity degree of 7N 99.9999%, definitely higher than that of OFC copper.

Conductors of 6.58 mm2made of pure AM-RCC copper with a purity grade of 7N 99.9999% in very thin strands of 0.1mm and each conductor consists of 714 wires. AM-RCC (Annealed Multicore Recyclable Copper Conductor) is a conductor made using a special processing technique whereby a single wire is drawn in the absence of oxygen from a large conductor.

At each step the copper is annealed and the grain becomes larger and larger, improving purity and conductivity. At the end of the process we obtain a Multicore conductor with strands like hair and a very high degree of purity (N7 99.9999%), which allows the signal to pass perfectly and the cable to obtain very high degrees of flexibility, despite the high cross sections involved.

Thanks to the use of quality materials and a structure with twisted conductors, it allows very low resistance levels (3.1 Ohm/Km) with a current support of up to 650W RMS, despite its small size. The performance is amazing, with a clean signal and extreme spatiality. A cable per linear metre that guarantees top performance in all conditions.

Hexagonal geometry with triple twisted wires and solid core central conductor. The conductors are twisted around the solid core conductor and allow the
The conductors are twisted around the solid core conductor and enable very high inductance reduction. The insulation of the conductors is made of TPE Elastomer, which guarantees a very good dielectric constant. In addition, there are PE cords, which further improve the insulation and perfect the cable routing.

Double shielding for this beautiful cable, with Aluminium/Mylar foil Overbraid in OFC copper.
All this is encased in an extra thick, extra flexible and robust PVC jacket with an outer diameter of 18 mm.Ricable Custom Speaker SH65 is designed, manufactured and packaged entirely in Italy. Production is carried out with constant quality control in order to guarantee long-lasting performance. For this reason we are able to provide a lifetime WARRANTY on our product. Ideal for connecting high-end Hi-Fi systems and main home cinema speakers. Excellent support for professional installations where robustness, reliability and quality are required. Valuable support for DIY projects and internal wiring of equipment.

למידע נוסף מאתר היבואן : לחץ כאן


SH65 Custom Speaker

Ricable Custom SH65 is a cable Speakermade for those who are looking for a High-End cable to make Excellent Speaker Cables, both for home and professional use. Derived from the Hexaphonic technology developed by Ricable, it has conductors made of AM-RCC Copper with a purity degree of 7N 99.9999%, definitely higher than that of OFC copper.

Conductors of 6.58 mm2made of pure AM-RCC copper with a purity grade of 7N 99.9999% in very thin strands of 0.1mm and each conductor consists of 714 wires. AM-RCC (Annealed Multicore Recyclable Copper Conductor) is a conductor made using a special processing technique whereby a single wire is drawn in the absence of oxygen from a large conductor.

At each step the copper is annealed and the grain becomes larger and larger, improving purity and conductivity. At the end of the process we obtain a Multicore conductor with strands like hair and a very high degree of purity (N7 99.9999%), which allows the signal to pass perfectly and the cable to obtain very high degrees of flexibility, despite the high cross sections involved.

Thanks to the use of quality materials and a structure with twisted conductors, it allows very low resistance levels (3.1 Ohm/Km) with a current support of up to 650W RMS, despite its small size. The performance is amazing, with a clean signal and extreme spatiality. A cable per linear metre that guarantees top performance in all conditions.

Hexagonal geometry with triple twisted wires and solid core central conductor. The conductors are twisted around the solid core conductor and allow the
The conductors are twisted around the solid core conductor and enable very high inductance reduction. The insulation of the conductors is made of TPE Elastomer, which guarantees a very good dielectric constant. In addition, there are PE cords, which further improve the insulation and perfect the cable routing.

Double shielding for this beautiful cable, with Aluminium/Mylar foil Overbraid in OFC copper.
All this is encased in an extra thick, extra flexible and robust PVC jacket with an outer diameter of 18 mm.Ricable Custom Speaker SH65 is designed, manufactured and packaged entirely in Italy. Production is carried out with constant quality control in order to guarantee long-lasting performance. For this reason we are able to provide a lifetime WARRANTY on our product. Ideal for connecting high-end Hi-Fi systems and main home cinema speakers. Excellent support for professional installations where robustness, reliability and quality are required. Valuable support for DIY projects and internal wiring of equipment.

למידע נוסף מאתר היבואן : לחץ כאן