|
Preamplifier (analog)
|
| Input impedance (RCA) |
10kΩ |
| Input impedance (XLR) |
20kΩ |
| Output impedance (RCA: PRE, LINE) |
47Ω |
| Output impedance (XLR) |
94Ω |
| Gain factor |
1 |
| Distortion factor (6.3) |
< 0.001% |
| Distortion factor (8.3) |
< 0.02% |
| Signal-to-noise ratio |
> 98dB |
| Crosstalk attenuation (channels) |
> 100dB |
| Crosstalk attenuation (inputs) |
> 87dB |
| Input headroom (1% THD) |
4.3V |
| Output headroom PRE OUT (1% THD) |
5.4V |
| Output level LINE OUT |
2.5V |
| Frequency response at -3dB (6.3) |
< 0Hz to > 70kHz |
| Frequency response at -3dB (8.3) |
< 5Hz to > 30kHz |
| Headphone amplifier |
|
| Output impedance |
15Ω |
| Gain factor |
3.0 |
| Distortion factor |
< 0.002% |
| Signal-to-noise ratio |
> 97dB |
| Output headroom (1% THD) |
6.5V |
|
Network
|
| LAN connection (hot plug capable) |
100 Mbit/s |
| Supported WLAN/WiFi standards |
2.4/ 5GHz/ 802.11a/b/g/n/ac |
| Number of antennas |
2 |
| WPS |
yes |
|
Streaming
|
| Max. sampling rates |
DSD128, 32 Bit/384 kHz PCM |
| Streaming services |
AirPlay, Qobuz, Roon, Spotify, TIDAL, HighResAudio |
| Supported file formats |
WAV, MP3, WM, AAC, FLAC, ALAC, DSD, Ogg, AIFF |
|
Bluetooth
|
| Bluetooth standard |
5.0 |
| Supported Bluetooth profiles |
AVRCP 1.5, AD2P |
|
USB-A Input
|
| USB standard |
USB 2.0 |
| Max. current |
500 mA |
| Supported formats |
FAT16, FAT32, NTFS |
| WARNING: |
The USB input is exclusively for hard drives and USB sticks! |
|
USB-B Input
|
| USB standard |
USB 2.0 |
| Supported formats |
Up to DSD128 / 192 kHz with 24 Bit |
| WARNING: |
The USB-B input is intended for direct connection with a PC or MAC! |
|
Digital inputs (S/P-DIF / Coaxial)
|
| Max. sampling/bit rate (OPTO) |
96 kHz / 24 Bit |
| Max. sampling/bit rate (COAX) |
192 kHz / 24 Bit |
| Min. signal level [Vpp] at 192kHz (COAX) |
> 150 mVpp |
| Input impedance (COAX) |
75 Ω |
| Deemphasis (OPTO, COAX) |
Yes, automatic |
| NOTE: |
When using digital inputs |
|
Digital outputs (S/P-DIF / Coaxial)
|
| Max. sampling/bit rate (OPTO) |
96 kHz / 24 Bit |
| Max. sampling/bit rate (COAX) |
192 kHz / 24 Bit |
| Output impedance (COAX) |
75 Ω |
| NOTE: |
When using digital outputs |
|
Control
|
| Trigger output (2x) |
12V |
| NOTE: |
Please use a standard 3.5mm mono jack cable for the trigger connections. |
| Power connection |
|
| Power supply |
100V-240V / 50Hz-60Hz |
| Power consumption standby |
< 1.0 Watt |
| Power consumption network standby |
< 3 Watt |
| Power consumption idle |
< 35 Watt |
| Power consumption (maximum) |
60 Watt |
| Fuse used (preamplifier section) |
3x T3.125A |
|
General
|
| Weight |
12 kg |
| Dimensions (WxHxD) |
430 x 122 x 350mm |
| Warranty |
2 years + 2 years with online registration |
| |
*Warranty periods may vary in different distribution countries |