מגשרים לרמקולים BRIDGE - Set 4 pcs. Jumpers Hi-End for Hi-Fi Acoustic Loudspeakers

Set of jumpers to connect High and Low terminals of high fidelity loudspeakers. Ideal in combination with Dedalus and Magnus Speaker cables. Conductor in Copper MARC 7N and connectors in Pure Copper.
422 ₪
Производитель: ricable
Вендор: audioclub
Бесплатная доставка
Дата доставки 7 ימי עסקים
*
+ -
מקבלים תשלום ב:


אשראי עד 12 תשלומים ללא ריבית.
יעוץ והכוונה מקצועית שירות והדרכה גם לאחר הקניה.
ליעוץ והזמנה טלפונית 03-5166919
 
משלוחים וזמני אספקה:

ניתן לאיסוף ממחסן ראשי ,הירקון 76 תל אביב- עד 3 ימי עסקים.
 
משלוח אקספרס עד הבית  לכל הארץ.
 
 

 

מוצרים מיבואן רשמי עם אחריות מלאה ומענה טלפוני, משלוחים מהירים לכל רחבי הארץ .

Your Hi-Fi system is like a jigsaw puzzle in which each component plays an important role in forming the final picture. Attention to detail is important to ensure smooth, unobstructed listening of the signal, starting from the source and ending with the speakers. Dedalus Bridges were born with the intention of offering the best for replacing the stock jumpers of your loudspeakers. Often high end loudspeakers are fitted with 4 binding posts because they offer the option of Bi-Wiring or Bi-Amping. If not used in such configurations, the "High Level" binding posts should be connected to the "Low Level" binding posts. All Loudspeaker manufacturers supply jumpers, which are usually a poor quality brass plate. This situation leads to enormous disadvantages in reproduction, because the signal Speaker is not transmitted with the same purity as from the amplifier when using quality Speaker Cables. To remedy this situation and have the maximum sound performance, simply replace the jumpers supplied with Ricable Dedalus Bridges, in this way you will put your system in the best conditions of reproduction.

Key Features

Ricable Dedalus Bridges are designed to work best with our Dedalus and Magnus series cables, but are of course also suitable with lesser Speaker cables.

  • MARC CONDUCTOR 70% compared to OFC: 6.4 mm2 copper 7N MARC (Multicore Annealed Ricable Conductor) conductors with 0.1 mm strands with smoother and more compact surface allowing 70% better audio transmission than OFC Copper.
  • UNCOMPROMISING CONSTRUCTION: Twisted geometry with 750 wires per conductor insulated with polymer that dramatically improves the audio signal.
  • FOR ALL NEEDS: Dedalus Bridge are available in two versions. With pure Copper Forks on both sides or with Forks on one side and Copper/Tellurium Bananas on the other side. The high flexibility and the length of 16 cm, allow the use in all acoustic speakers, both when the clamps are very close to each other, and when they have important distances. The double cantilever forks accept all types of clamps with diameters up to 8 mm.
  • HAND-MADE IN ITALY by RICABLE: Every step of the production process is carried out entirely by hand and the checks on each individual piece are obsessive, with the use of new tools and testing procedures, but above all with the help of meticulous human control. From the union of Technology and Italian Craftsmanship, DEDALUS cables Made in Italy are born.

Dedalus Bridge Series Models:

mod. DPF: Fork / Fork version
mod. DPB: Fork / BANANA version

Your Hi-Fi system is like a jigsaw puzzle in which each component plays an important role in forming the final picture. Attention to detail is important to ensure smooth, unobstructed listening of the signal, starting from the source and ending with the speakers. Dedalus Bridges were born with the intention of offering the best for replacing the stock jumpers of your loudspeakers. Often high end loudspeakers are fitted with 4 binding posts because they offer the option of Bi-Wiring or Bi-Amping. If not used in such configurations, the "High Level" binding posts should be connected to the "Low Level" binding posts. All Loudspeaker manufacturers supply jumpers, which are usually a poor quality brass plate. This situation leads to enormous disadvantages in reproduction, because the signal Speaker is not transmitted with the same purity as from the amplifier when using quality Speaker Cables. To remedy this situation and have the maximum sound performance, simply replace the jumpers supplied with Ricable Dedalus Bridges, in this way you will put your system in the best conditions of reproduction.

Key Features

Ricable Dedalus Bridges are designed to work best with our Dedalus and Magnus series cables, but are of course also suitable with lesser Speaker cables.

  • MARC CONDUCTOR 70% compared to OFC: 6.4 mm2 copper 7N MARC (Multicore Annealed Ricable Conductor) conductors with 0.1 mm strands with smoother and more compact surface allowing 70% better audio transmission than OFC Copper.
  • UNCOMPROMISING CONSTRUCTION: Twisted geometry with 750 wires per conductor insulated with polymer that dramatically improves the audio signal.
  • FOR ALL NEEDS: Dedalus Bridge are available in two versions. With pure Copper Forks on both sides or with Forks on one side and Copper/Tellurium Bananas on the other side. The high flexibility and the length of 16 cm, allow the use in all acoustic speakers, both when the clamps are very close to each other, and when they have important distances. The double cantilever forks accept all types of clamps with diameters up to 8 mm.
  • HAND-MADE IN ITALY by RICABLE: Every step of the production process is carried out entirely by hand and the checks on each individual piece are obsessive, with the use of new tools and testing procedures, but above all with the help of meticulous human control. From the union of Technology and Italian Craftsmanship, DEDALUS cables Made in Italy are born.

Dedalus Bridge Series Models:

mod. DPF: Fork / Fork version
mod. DPB: Fork / BANANA version

Ключевые слова