מגבר כח YBA - SIGNATURE MONO POWER AMPLIFIER

The most recent product added to the Signature range, this mono amplifier is truly for the most uncompromising audiophile. It is the pinnacle of research carried out for design, development and manufacturing. Signature provides a rarely seen standard of excellence and is acknowledged for its uncompromising high fidelity reproduction.
125,000 ₪
יצרן: YBA
ספק: audioclub
משלוח חינם
מועד אספקה 7 ימי עסקים
+ -
מקבלים תשלום ב:


אשראי עד 12 תשלומים ללא ריבית.
יעוץ והכוונה מקצועית שירות והדרכה גם לאחר הקניה.
ליעוץ והזמנה טלפונית 03-5166919
 
משלוחים וזמני אספקה:

ניתן לאיסוף ממחסן ראשי ,הירקון 76 תל אביב- עד 3 ימי עסקים.
 
משלוח אקספרס עד הבית  לכל הארץ.
 
 

 

מוצרים מיבואן רשמי עם אחריות מלאה ומענה טלפוני, משלוחים מהירים לכל רחבי הארץ .

The choice of materials is an important part of the design of YBA amplifiers. The chassis of the Signature is made from a block of aluminum milled in the mass. Besides absolute rigidity, it also allows different internal boundaries free from electro-magnetic interference.

This mechanical structure allows mounting on 2 levels of components that are fixed on either side of the central portion! The transistors are mounted on a solid aluminium block with special mica wafers, which improves heat dissipation to avoid thermal distortions.

All of the materials used to manufacture for YBA electronics are non-magnetic. The selections and tests of the French manufactured components, are more precise to avoid any unbalanced effect and increase reliability.

YBA Signature transistors are specially selected in order to be perfectly matched. The mono amplifier is a derivative of the stereo power amplifier.

YBA’s BALANCED input / output explanation

All our preamplifiers or CD players offer true balanced output.

Amplifiers have a balanced input with 27kohm on pin 2 and 3, excepted Heritage and Design series. The design of the circuit inside the unit (and not outside) is symmetrical in all YBA products allowing us to have no passive component on the way of the signal, which is more important for YBA.

Regardless of whether we supply true balanced or not, we always recommend RCA input and output for the following reasons:

In balanced, you have one stage taking care of the positive part of the signal and a second stage taking care of the negative and then you add both together to receive or to send to another unit (amplifier, preamplifier).  In adding them you create something that nobody wants; it is a cross distortion.

You experience this distortion because a perfect amplifier does not exist, and you are using 3 different amplifiers to achieve ‘true balance’ but these amplifiers do not have not the same behaviour and are never identical.

Moreover, your power supply is supplying all these amplifiers and then is not as powerful and efficient.

You increase the output stage impedance and then you have less control. Sometimes, it seems better because everything is less on control and the bass is smoother. The gain is higher (the noise also!).

But it is not the truth.

The quality of the XLR contact is only a piece of metal and is of less quality than a good RCA connector.

The only reason to be true balanced is when you are using very long cable in professional studios to avoid humming problems. This is the reason it became fashionable and we see today that even a poor Japanese product can provide balanced outputs and inputs.

We provide balanced XLR connectors for those customers who want or who need absolutely use these connectors for very long cables.

This is normally very rare in domestic installations.

Product type

Mono Power Amplifier, Power Amplifier

Audio Outputs

1 speaker output (can be single wired or bi-wired)

Power Outputs

Mono 200W @ 8Ω per channel
Mono 400W @ 4Ω per channel

SNR

>95dB

Frequency Response

20Hz – 20kHz (-0.5dB)

THD+N (20Hz - 20kHz)

<0.1%

Inputs

1 RCA, 1 Balanced Input (Stereo)
1 Balanced Input (Mono)

Power Supply

Linear power supply with high performance UI-CORE Transformer 1000VA

Standby Power Consumption

<0.5W

Color / Finish

Natural aluminium

Dimensions (w x d x h)

430 x 390 x 170mm

Weight

42.5 kg

 

The choice of materials is an important part of the design of YBA amplifiers. The chassis of the Signature is made from a block of aluminum milled in the mass. Besides absolute rigidity, it also allows different internal boundaries free from electro-magnetic interference.

This mechanical structure allows mounting on 2 levels of components that are fixed on either side of the central portion! The transistors are mounted on a solid aluminium block with special mica wafers, which improves heat dissipation to avoid thermal distortions.

All of the materials used to manufacture for YBA electronics are non-magnetic. The selections and tests of the French manufactured components, are more precise to avoid any unbalanced effect and increase reliability.

YBA Signature transistors are specially selected in order to be perfectly matched. The mono amplifier is a derivative of the stereo power amplifier.

YBA’s BALANCED input / output explanation

All our preamplifiers or CD players offer true balanced output.

Amplifiers have a balanced input with 27kohm on pin 2 and 3, excepted Heritage and Design series. The design of the circuit inside the unit (and not outside) is symmetrical in all YBA products allowing us to have no passive component on the way of the signal, which is more important for YBA.

Regardless of whether we supply true balanced or not, we always recommend RCA input and output for the following reasons:

In balanced, you have one stage taking care of the positive part of the signal and a second stage taking care of the negative and then you add both together to receive or to send to another unit (amplifier, preamplifier).  In adding them you create something that nobody wants; it is a cross distortion.

You experience this distortion because a perfect amplifier does not exist, and you are using 3 different amplifiers to achieve ‘true balance’ but these amplifiers do not have not the same behaviour and are never identical.

Moreover, your power supply is supplying all these amplifiers and then is not as powerful and efficient.

You increase the output stage impedance and then you have less control. Sometimes, it seems better because everything is less on control and the bass is smoother. The gain is higher (the noise also!).

But it is not the truth.

The quality of the XLR contact is only a piece of metal and is of less quality than a good RCA connector.

The only reason to be true balanced is when you are using very long cable in professional studios to avoid humming problems. This is the reason it became fashionable and we see today that even a poor Japanese product can provide balanced outputs and inputs.

We provide balanced XLR connectors for those customers who want or who need absolutely use these connectors for very long cables.

This is normally very rare in domestic installations.

Product type

Mono Power Amplifier, Power Amplifier

Audio Outputs

1 speaker output (can be single wired or bi-wired)

Power Outputs

Mono 200W @ 8Ω per channel
Mono 400W @ 4Ω per channel

SNR

>95dB

Frequency Response

20Hz – 20kHz (-0.5dB)

THD+N (20Hz - 20kHz)

<0.1%

Inputs

1 RCA, 1 Balanced Input (Stereo)
1 Balanced Input (Mono)

Power Supply

Linear power supply with high performance UI-CORE Transformer 1000VA

Standby Power Consumption

<0.5W

Color / Finish

Natural aluminium

Dimensions (w x d x h)

430 x 390 x 170mm

Weight

42.5 kg

 
תגיות מוצר