CLASS A/CLASS A SE Power Amplifier

Discontinued products
התקשר לקבלת מחיר
יצרן: AUDIOANALOGUE
משלוח חינם
+ -
מקבלים תשלום ב:


אשראי עד 12 תשלומים ללא ריבית.
יעוץ והכוונה מקצועית שירות והדרכה גם לאחר הקניה.
ליעוץ והזמנה טלפונית 03-5166919
 
משלוחים וזמני אספקה:

ניתן לאיסוף ממחסן ראשי ,הירקון 76 תל אביב- עד 3 ימי עסקים.
 
משלוח אקספרס עד הבית  לכל הארץ.
 
 

 

מוצרים מיבואן רשמי עם אחריות מלאה ומענה טלפוני, משלוחים מהירים לכל רחבי הארץ .

State of art pure Class A power amplifier

Technical description

Two toroidal, 400VA transformer, one per channel. Dual mono design. Pure class A operation up to 50W @ 8 Ohm. Only double-sided metallized polypropylene film capacitor in the critical points. The internal stages are DC coupled and the offset is reduced by means of an integrating amplifiers. High current capability. The protection and control sections are galvanically insulated from the analog sections to minimize the digital noise. No mains fuse. The mains current is measured at the input of the transformer (with a current probe) and in case of malfunctions it's shutted off. The voltage of both channel is measured by means of optocoupler to avoid any ground loop. The DC offset on the output (loudspeakers) is also monitored by means of optocouplers. The protections are realized with a PLD (Programmable Logic Device), more fast and reliable compared to a microcontroller.

Technical features

  • Channels 2
  • Colours 2
  • Power on 8Ω load 50W classA(200W bridged mode)
  • Power on 4Ω load 100W
  • Power on 2Ω load 200W
  • THD + N (1W, 8Ohm 1 KHz) 0.02 %
  • Slew Rate 50 V/μs
  • Frequency Response(Att. 0dB, -3dB band) 1 Hz - 160 KHz
  • Input Noise(Band limits 0Hz-80kHz/A-weighted) -130 dB 
  • SNR > 100 dB
  • Dimensions(HxWxD) 320 x 445 x 460 mm
  • Weight 61.5 Kg

State of art pure Class A power amplifier

Technical description

Two toroidal, 400VA transformer, one per channel. Dual mono design. Pure class A operation up to 50W @ 8 Ohm. Only double-sided metallized polypropylene film capacitor in the critical points. The internal stages are DC coupled and the offset is reduced by means of an integrating amplifiers. High current capability. The protection and control sections are galvanically insulated from the analog sections to minimize the digital noise. No mains fuse. The mains current is measured at the input of the transformer (with a current probe) and in case of malfunctions it's shutted off. The voltage of both channel is measured by means of optocoupler to avoid any ground loop. The DC offset on the output (loudspeakers) is also monitored by means of optocouplers. The protections are realized with a PLD (Programmable Logic Device), more fast and reliable compared to a microcontroller.

Technical features

  • Channels 2
  • Colours 2
  • Power on 8Ω load 50W classA(200W bridged mode)
  • Power on 4Ω load 100W
  • Power on 2Ω load 200W
  • THD + N (1W, 8Ohm 1 KHz) 0.02 %
  • Slew Rate 50 V/μs
  • Frequency Response(Att. 0dB, -3dB band) 1 Hz - 160 KHz
  • Input Noise(Band limits 0Hz-80kHz/A-weighted) -130 dB 
  • SNR > 100 dB
  • Dimensions(HxWxD) 320 x 445 x 460 mm
  • Weight 61.5 Kg
תגיות מוצר