MEN220 Room Correction System

Works on 1/12 Octaves 2-Way Electronic Crossover for Bi-amping
התקשר לקבלת מחיר
יצרן: McIntosh
ספק: מוראל
משלוח חינם
מועד אספקה איסוף עצמי מהחנות, הירקון 76 תל אביב (לאחר קבלת אישור טלפוני)
+ -
מקבלים תשלום ב:


אשראי עד 12 תשלומים ללא ריבית.
יעוץ והכוונה מקצועית שירות והדרכה גם לאחר הקניה.
ליעוץ והזמנה טלפונית 03-5166919
 
משלוחים וזמני אספקה:

ניתן לאיסוף ממחסן ראשי ,הירקון 76 תל אביב- עד 3 ימי עסקים.
 
משלוח אקספרס עד הבית  לכל הארץ.
 
 

 

מוצרים מיבואן רשמי עם אחריות מלאה ומענה טלפוני, משלוחים מהירים לכל רחבי הארץ .

The MEN220 delivers a potent suite of Room Correction, Custom-EQ and 2-Way Crossover capabilities in one easy-to-use stereo component. While any single feature of the MEN220 has the power to optimize the sonic characteristics of the highest quality audio systems, combining all the features can reveal a level of clarity and resolution unattainable by any other means.

"I have never heard my speakers sound so wonderful!" - Michael (customer review)

Full system control and PC link are provided via RS232 while McIntosh data, power control and IR inputs offer additional remote control flexibility. Both single-ended and balanced connections are supported; a hand-held, IR remote control is included.

 

ELECTRONIC SPECIFICATIONS

UNLESS NOTED, THE FOLLOWING WERE TAKEN WITH ROOMPERFECT SET TO BYPASS MODE AND VOICING MODE SET TO NEUTRAL.

  • Frequency Response
    +0, -0.5dB from 20Hz to 20,000Hz
  • Total Harmonic Distortion
    0.002% from 20Hz to 20,000Hz
  • Maximum Input Voltage
    4.5V Unbalanced and Balanced (Preamp-Power Amp)
    2.25V Unbalanced and Balanced (Processor Loop)
  • Maximum Output Voltage
    4.5V Unbalanced and Balanced (Preamp-Power Amp)
    2.25V Unbalanced and Balanced (Processor Loop)
  • Signal To Noise Ratio (A-Weighted)
    100dB
  • Input Impedance
    10K ohms Unbalanced and Balanced
  • Voltage Gain
    0dB
  • Output Impedance
    50 ohms
  • Crossover Filter Types, Order and Slope
    Butterworth, 1st order, 6 dB/octave
    Butterworth, 2nd order, 12 dB/octave
    Butterworth, 4th order, 24 dB/octave
    Linkwitz-Riley, 2nd order, 12 dB/octave
    Linkwitz-Riley, 4th order, 24 dB/octave
    Linkwitz-Riley, 8th order, 48 dB/octave

WEIGHTS & DIMENSIONS

  • Unit Dimensions (W x H x D)
    17-1/2" (44.45cm) x 6" (15.24cm) x 18" (45.72cm) (including front panel, knobs and cables)
  • Unit Weight
    25.5 lbs (11.6 kg)
  • Shipping Weight
    41.9 lbs (19 kg)

The MEN220 delivers a potent suite of Room Correction, Custom-EQ and 2-Way Crossover capabilities in one easy-to-use stereo component. While any single feature of the MEN220 has the power to optimize the sonic characteristics of the highest quality audio systems, combining all the features can reveal a level of clarity and resolution unattainable by any other means.

"I have never heard my speakers sound so wonderful!" - Michael (customer review)

Full system control and PC link are provided via RS232 while McIntosh data, power control and IR inputs offer additional remote control flexibility. Both single-ended and balanced connections are supported; a hand-held, IR remote control is included.

 

ELECTRONIC SPECIFICATIONS

UNLESS NOTED, THE FOLLOWING WERE TAKEN WITH ROOMPERFECT SET TO BYPASS MODE AND VOICING MODE SET TO NEUTRAL.

  • Frequency Response
    +0, -0.5dB from 20Hz to 20,000Hz
  • Total Harmonic Distortion
    0.002% from 20Hz to 20,000Hz
  • Maximum Input Voltage
    4.5V Unbalanced and Balanced (Preamp-Power Amp)
    2.25V Unbalanced and Balanced (Processor Loop)
  • Maximum Output Voltage
    4.5V Unbalanced and Balanced (Preamp-Power Amp)
    2.25V Unbalanced and Balanced (Processor Loop)
  • Signal To Noise Ratio (A-Weighted)
    100dB
  • Input Impedance
    10K ohms Unbalanced and Balanced
  • Voltage Gain
    0dB
  • Output Impedance
    50 ohms
  • Crossover Filter Types, Order and Slope
    Butterworth, 1st order, 6 dB/octave
    Butterworth, 2nd order, 12 dB/octave
    Butterworth, 4th order, 24 dB/octave
    Linkwitz-Riley, 2nd order, 12 dB/octave
    Linkwitz-Riley, 4th order, 24 dB/octave
    Linkwitz-Riley, 8th order, 48 dB/octave

WEIGHTS & DIMENSIONS

  • Unit Dimensions (W x H x D)
    17-1/2" (44.45cm) x 6" (15.24cm) x 18" (45.72cm) (including front panel, knobs and cables)
  • Unit Weight
    25.5 lbs (11.6 kg)
  • Shipping Weight
    41.9 lbs (19 kg)
תגיות מוצר